You request three quotes for a 2-car garage floor and get three very different numbers: $1,800, $2,900, and $3,500. Same garage, same square footage. So what's the difference?
As an epoxy floor coating contractor in Orange County, we hear this question every week. The short answer: you're usually not comparing the same floor. Here's what's really behind a low price, and what to ask before you sign.
Reason 1: The "ad price" that isn't the real price
Many low numbers you see online — "2-car garage for $1,800!" — are an advertising format. The price covers only the basic flake coat. Then, during the visit, the extras appear:
Surface prep and grinding — extra
Crack and joint repair — extra
Primer or moisture vapor barrier — extra
Polyaspartic topcoat — extra
By the time the floor is actually done right, the total lands at a normal market price — or higher. The low number was just a way to get the call.
What to ask: "Does your price include grinding, crack repair, a moisture test, and the topcoat?"
Reason 2: Big-box DIY kits and cheap materials
The other way to quote low is to use cheap materials. A home-improvement-store epoxy kit for a 2-car garage costs a few hundred dollars. It's a basic two-part epoxy with a bag of flakes — and that's it. No real primer. No topcoat.
The flakes simply sink into a thin layer of epoxy with nothing protecting them. Plain epoxy also yellows over time in sunlight, scratches easily, and can lift under hot tires. These kits are made for weekend DIY projects, not for a floor that should last for years.
What a cheap floor skips — and why it peels
A low-cost job usually cuts corners on the steps you can't see once the floor is finished:
No moisture test. Concrete in Orange County, especially near the ocean, often carries moisture from below. It pushes up under the coating and makes it bubble and peel.
No vapor barrier in coastal areas where it's needed.
Poor grinding. Without proper diamond grinding, the coating has nothing to grip.
No quality primer and no topcoat. The floor wears out fast and loses its shine.
The result: within a year or two, the floor starts to chip and peel. And that hurts everyone. The homeowner decides that "all epoxy floors are bad" and tells their neighbors the same. But the problem was never epoxy itself — it was the shortcuts.
Sun, metallic epoxy, and the right system for your garage
We always tell our clients the truth about where each system works best.
Metallic and 100% epoxy floors look stunning, but epoxy is sensitive to UV light. They're best indoors — living spaces, studios, showrooms — away from direct sun.
A garage is different. Every time the door opens, sunlight hits the floor. That's why for garages we recommend a flake system with a polyaspartic topcoat. Polyaspartic is UV stable, so it won't yellow, and it's highly resistant to scratches, hot tires, oil, and chemicals. It's the layer that keeps your floor looking new.
How we do it at ZHLA Painting
Every flake floor we install follows the same steps:
1. Moisture test. We test every slab before we start. In coastal cities like Laguna Beach, San Clemente, and Newport Beach, we recommend a moisture vapor barrier regardless — it's the safe choice so close to the ocean. Further inland, we decide together with you based on the test results.
2. Oil stain treatment and deep cleaning. Old oil spots from cars are treated and removed before coating, so nothing weakens the bond.
3. Diamond grinding and prep. Included in our standard price.
4. Crack and joint repair. We fill and restore cracks and joints so the surface is smooth and sound.
5. Moisture vapor barrier, when needed.
6. Base coat with full flake broadcast.
7. Polyaspartic topcoat for UV protection, gloss, and long-term durability.
Why our pricing starts at $7 per sq. ft
We're not the most expensive company in Orange County — our pricing is fair and right in line with the local market for a professional system. What you get for it is a floor built to last.
We work with Simiron, a professional-grade coating manufacturer known for consistent quality and advanced formulas. These products aren't cheap — you can look up Simiron pricing yourself — and that's exactly why we can't offer a bargain-bin price. We won't cut the prep or swap in cheaper materials to win a bid.
Your floor, your color
We offer a large palette of flake blends, and we can go further: we can order a completely custom flake color made to match your vision, straight from the manufacturer. Custom orders require a deposit and take about a month to arrive — worth it for a garage floor no one else has.
Get a quote that includes everything
When you compare quotes, compare the whole system: moisture test, prep, repairs, barrier, base, flakes, and topcoat. Our estimates spell out every step, so you know exactly what you're paying for.
Ready for a floor that lasts? Request a free estimate and on-site moisture test from ZHLA Painting — serving Orange County, CA.

